Dobrodošli na naše web stranice!

apr . 23, 2023 18:42 Povratak na listu

Postavljanje ograde za autoput



  1. Napravite rupu za stupove i nosače.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Ugradnja stubova i proteza.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Montaža panela od zavarene žičane mreže

Zatim morate sačekati da se beton dovoljno osuši. Zatim možete montirati ploču ograde od zavarene žičane mreže zajedno sa stupom. Pošto smo na stubu napravili kuke, prilikom postavljanja žičane mreže, poravnavanje stavite žicu na udicu, kako bi ploča od žičane mreže bila stabilnija, ovdje treba da udarimo kuke ravno čekićem.

 

security concertina razor wire fence exporter

 

  1. Instalacija zatezne žice

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Dijeli

Ako ste zainteresovani za naše proizvode, možete izabrati da ostavite svoje podatke ovde, a mi ćemo vas uskoro kontaktirati.


bs_BABosnian