Takulandilani kumasamba athu!

Apr. 23, 2023 18:42 Bwererani ku mndandanda

Kukhazikitsa mpanda wamsewu



  1. Pangani dzenje la nsanamira ndi zomangira.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Kuyika ma posts ndi braces.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Welded wire mesh panel unsembe

Ndiye muyenera kudikira mpaka konkire youma mokwanira. Ndiye inu mukhoza kukhazikitsa welded wire mesh mpanda gulu pamodzi ndi nsanamira. Chifukwa pa positi, tapanga mbedza, tikayika ma wire mesh panel, kuyanjanitsa kuyika waya pa mbedza, kuti gulu la ma waya likhale lokhazikika, apa tifunika kugunda mbedza ndi nyundo.

 

security concertina razor wire fence exporter

 

  1. Kuyika waya wovuta

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Gawani

Ngati muli ndi chidwi ndi zinthu zathu, mutha kusankha kusiya zambiri zanu pano, ndipo tidzalumikizana nanu posachedwa.


nyNorwegian