Maligayang pagdating sa aming mga website!

Abr. 23, 2023 18:42 Bumalik sa listahan

Pag-install ng bakod sa highway



  1. Gumawa ng butas para sa mga poste at braces.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Pag-install ng mga post at braces.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Pag-install ng welded wire mesh panel

Pagkatapos ay kailangan mong maghintay hanggang ang kongkreto ay sapat na matuyo. Pagkatapos ay maaari mong i-install ang welded wire mesh fence panel kasama ang poste. Dahil sa poste, ginawa namin ang mga kawit, kapag na-install ang wire mesh panel, alignment ilagay ang wire sa hook, upang ang wire mesh panel ay mas matatag, dito kailangan namin upang pindutin ang mga kawit flat sa martilyo.

 

security concertina razor wire fence exporter

 

  1. Pag-install ng tension wire

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Ibahagi

Kung interesado ka sa aming mga produkto, maaari mong piliing iwanan ang iyong impormasyon dito, at makikipag-ugnayan kami sa iyo sa ilang sandali.


tlTagalog