Veb saytlarımıza xoş gəlmisiniz!
  • Ev
  • Məqalə

İyl . 25, 2023 09:54 Siyahıya qayıt

Loading of welded  mesh highway fence



Loading of welded  mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

3d welded mesh fence

 

best 3d welded mesh fence

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

cheap 3d welded mesh fence

Installation of this fence 

  1. Dirsəklər və mötərizələr üçün çuxur düzəldin.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

famous 3d welded mesh fence

  1. Dirsəklərin və dayaqların quraşdırılması.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

high quality 3d welded mesh fence

  1. Qaynaqlanmış tel hörgü panellərinin quraşdırılması

Sonra beton kifayət qədər quruyana qədər gözləməlisiniz. Sonra dirəklə birlikdə qaynaqlanmış tel örgülü hasar panelini quraşdıra bilərsiniz. Çünki dirəkdə biz qarmaqları düzəltmişik, məftil hörgü panelini quraşdırarkən, hizalama teli çəngəl üzərinə qoyduq, məftil panelin daha dayanıqlı olması üçün burada qarmaqları çəkiclə düz vurmaq lazımdır.

 

3d welded mesh fence

  1. Gərginlik telinin quraşdırılması

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

Welcome to contact and send inquiries  

Paylaşın

Məhsullarımızla maraqlanırsınızsa, məlumatlarınızı burada buraxmağı seçə bilərsiniz və biz qısa zamanda sizinlə əlaqə saxlayacağıq.


azAzerbaijani