Сардэчна запрашаем на нашы сайты!

ліп . 25, 2023 09:54 Вярнуцца да спісу

Loading of welded  mesh highway fence



Loading of welded  mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

3d welded mesh fence

 

best 3d welded mesh fence

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

cheap 3d welded mesh fence

Installation of this fence 

  1. Зрабіце адтуліну для стоек і раскосаў.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

famous 3d welded mesh fence

  1. Ўстаноўка стоек і падкосаў.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

high quality 3d welded mesh fence

  1. Мантаж панэлі з зварной сеткі

Затым неабходна пачакаць, пакуль бетон досыць высахне. Затым вы можаце ўсталяваць панэль плота з зварной сеткі разам са слупам. Паколькі на слупе мы зрабілі гаплікі, пры ўсталёўцы панэлі з драцяной сеткі, выраўноўваючы, надзеньце дрот на крук, каб панэль з драцяной сеткі была больш устойлівай, тут нам трэба ўдарыць па гаках малатком.

 

3d welded mesh fence

  1. Мантаж нацяжной дроту

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

Welcome to contact and send inquiries  

падзяліцца

Калі вы зацікаўлены ў нашых прадуктах, вы можаце пакінуць сваю інфармацыю тут, і мы звяжамся з вамі ў бліжэйшы час.


belBelarusian