Добре дошли в нашите сайтове!

юли . 25, 2023 09:54 Обратно към списъка

Loading of welded  mesh highway fence



Loading of welded  mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

3d welded mesh fence

 

best 3d welded mesh fence

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

cheap 3d welded mesh fence

Installation of this fence 

  1. Направете дупката за стълбове и скоби.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

famous 3d welded mesh fence

  1. Монтаж на стълбове и скоби.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

high quality 3d welded mesh fence

  1. Монтаж на панел от заварена телена мрежа

След това трябва да изчакате, докато бетонът изсъхне достатъчно. След това можете да монтирате оградния панел от заварена телена мрежа заедно със стълба. Тъй като на стълба сме направили куките, когато монтирате панела от телена мрежа, подравняването поставете телта върху куката, за да може панелът от телена мрежа да е по-стабилен, тук трябва да ударим куките плоски с чука.

 

3d welded mesh fence

  1. Монтаж на обтегателен проводник

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

Welcome to contact and send inquiries  

Дял

Ако се интересувате от нашите продукти, можете да изберете да оставите вашата информация тук и ние ще се свържем с вас скоро.


bg_BGBulgarian