Laipni lūdzam mūsu tīmekļa vietnēs!

Jūl . 25, 2023 09:54 Atpakaļ uz sarakstu

Loading of welded  mesh highway fence



Loading of welded  mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

3d welded mesh fence

 

best 3d welded mesh fence

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

cheap 3d welded mesh fence

Installation of this fence 

  1. Izveidojiet caurumu stabiem un lencēm.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

famous 3d welded mesh fence

  1. Stabu un breketu uzstādīšana.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

high quality 3d welded mesh fence

  1. Metināto stiepļu sieta paneļu uzstādīšana

Tad jums jāgaida, līdz betons pietiekami izžūst. Pēc tam kopā ar stabu var uzstādīt metināto stiepļu sieta žoga paneli. Tā kā uz staba esam izgatavojuši āķus, uzstādot stiepļu sieta paneli, izlīdzināšanu uzlieciet stiepli uz āķa, lai stiepļu sieta panelis būtu stabilāks, šeit vajag ar āmuru sasist āķus plakaniski.

 

3d welded mesh fence

  1. Spriegošanas stieples uzstādīšana

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

Welcome to contact and send inquiries  

Dalīties

Ja jūs interesē mūsu produkti, varat izvēlēties atstāt savu informāciju šeit, un mēs ar jums sazināsimies tuvākajā laikā.


lvLatvian