Loading of welded mesh highway fence
We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting
This kind of fence includes:
Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm
Wire diameter: 1.8mm-3.5mm
Width: 1.5m-2.2m
Length: 20m-50m each roll
Installation of this fence
Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post, dig two holes for two braces. the hole size same as the post hole size.
After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:
Soňra beton ýeterlik derejede guraýança garaşmaly. Soňra kebşirlenen simden ýasalan diwar paneli post bilen bilelikde gurup bilersiňiz. Sebäbi ýazgyda, çeňňek ýasadyk, sim tor panelini guranymyzda, sim paneli has durnukly bolar ýaly, tekizlemek simleri çeňňege goýýar, bu ýerde çeňňekleri çekiç bilen tekizlemeli.
Firstly, make one end of the tension wire fixed on the first post with the wire tighterner . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.
Welcome to contact and send inquiries