Loading of welded mesh highway fence
We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting
This kind of fence includes:
Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm
Wire diameter: 1.8mm-3.5mm
Width: 1.5m-2.2m
Length: 20m-50m each roll
Installation of this fence
Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post, dig two holes for two braces. the hole size same as the post hole size.
After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:
Dayon kinahanglan ka maghulat hangtud nga ang kongkreto igo nga mamala. Unya mahimo nimong i-install ang welded wire mesh fence panel kauban ang post. Tungod kay sa poste, gihimo namo ang mga kaw-it, sa dihang i-install ang wire mesh panel, alignment ibutang ang wire sa hook, aron ang wire mesh panel mas lig-on, dinhi kinahanglan nato nga maigo ang mga kaw-it nga patag gamit ang martilyo.
Firstly, make one end of the tension wire fixed on the first post with the wire tighterner . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.
Welcome to contact and send inquiries