Bienvenue sur nos sites Web!

Juil . 25, 2023 09:54 Retour à la liste

Loading of welded  mesh highway fence



Loading of welded  mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

3d welded mesh fence

 

best 3d welded mesh fence

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

cheap 3d welded mesh fence

Installation of this fence 

  1. Faites le trou pour les poteaux et les accolades.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

famous 3d welded mesh fence

  1. Pose de poteaux et contreventements.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

high quality 3d welded mesh fence

  1. Pose de panneaux en treillis soudé

Ensuite, vous devez attendre que le béton soit suffisamment sec. Ensuite, vous pouvez installer le panneau de clôture en treillis métallique soudé avec le poteau. Parce que sur le poteau, nous avons fait les crochets, lors de l'installation du panneau en treillis métallique, alignez le fil sur le crochet, afin que le panneau en treillis métallique soit plus stable, ici nous avons besoin de frapper les crochets à plat avec le marteau.

 

3d welded mesh fence

  1. Pose de fil de tension

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

Welcome to contact and send inquiries  

Partager

Si vous êtes intéressé par nos produits, vous pouvez choisir de laisser vos informations ici, et nous vous contacterons sous peu.


fr_FRFrench