Nabata na webụsaịtị anyị!

Jul . 06, 2023 11:18 Laghachi na ndepụta

Loading of welded wire mesh highway fence



loading of welded wire mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

razor barbed wire tape companies

razor barbed wire tape company

razor barbed wire tape exporter

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

razor barbed wire tape exporters

Installation of this fence 

  1. Mee oghere maka posts na ihe nkwado.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

  1. Ntinye akwụkwọ ozi na nkwado nkwado.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

  1. welded waya ntupu panel echichi

Mgbe ahụ, ị ga-echere ruo mgbe kọnkịrị akpọnwụ nke ọma. Mgbe ahụ ị nwere ike iwunye welded waya ntupu nsu panel ọnụ na post. N'ihi na na post, anyị mere nko, mgbe wụnye waya ntupu panel, alignment tinye waya na nko, ka waya ntupu panel bụ ihe kwụsie ike, ebe a chọrọ ka anyị see nko ewepụghị na hama.

  1. Nrụnye waya esemokwu

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

Welcome to contact and send inquiries  

Kekọrịta

Ọ bụrụ na ị nwere mmasị na ngwaahịa anyị, ị nwere ike ịhọrọ ịhapụ ozi gị ebe a, anyị ga-akpọtụrụ gị n'oge na-adịghị anya.


igIgbo