Nau mai ki o maatau paetukutuku!

Jul . 06, 2023 11:18 Hoki ki te rarangi

Loading of welded wire mesh highway fence



loading of welded wire mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

razor barbed wire tape companies

razor barbed wire tape company

razor barbed wire tape exporter

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

razor barbed wire tape exporters

Installation of this fence 

  1. Hangaia te kohao mo nga pou me nga taiapa.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

  1. Te whakairinga me nga taiapa.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

  1. He paiherea te whakaurunga paewhiri mata waea

Na me tatari koe kia maroke te raima. Na ka taea e koe te whakauru i te panui taiapa waea waea me te pou. Na te mea i runga i te pou, kua mahia e matou nga matau, i te wa e whakauru ana i te panui waea waea, ka whakanohohia te waea ki runga i te matau, kia pai ake ai te paanui waea waea, i konei me patu nga matau ki te hama.

  1. Tāuta waea mānukanuka

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

Welcome to contact and send inquiries  

Tiri

Mena kei te pirangi koe ki a maatau hua, ka taea e koe te kowhiri ki te waiho i o korero ki konei, a ka tata tonu te korero ki a koe.


miMaori