Биздин веб-сайттарга кош келиңиздер!

Jul . 06, 2023 11:18 Тизмеге кайтуу

Loading of welded wire mesh highway fence



loading of welded wire mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

razor barbed wire tape companies

razor barbed wire tape company

razor barbed wire tape exporter

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

razor barbed wire tape exporters

Installation of this fence 

  1. Тир жана кашаа үчүн тешик жаса.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

  1. Постторду жана кашааларды орнотуу.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

  1. Ширетилген зым тор панелди орнотуу

Андан кийин бетон жетиштүү кургаганга чейин күтүшүбүз керек. Андан кийин ширетилген зым тор тосмо панелин пост менен бирге орното аласыз. Постто биз илгичтерди жасадык, зым тор панелди орнотуп жатканда, тегиздөө зымды илгичке коюп, зым тор панели туруктуураак болушу үчүн, бул жерде илгичтерди балка менен тегиз чапташыбыз керек.

  1. Тартуу зымдарын орнотуу

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

Welcome to contact and send inquiries  

Бөлүшүү

Эгерде сизди биздин продуктылар кызыктырса, анда маалыматыңызды бул жерге калтырууну тандасаңыз болот, биз сиз менен жакын арада байланышабыз.


kyKyrgyz