Ku soo dhawoow mareegahayaga!

Jul . 06, 2023 11:18 Ku laabo liiska

Loading of welded wire mesh highway fence



loading of welded wire mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

razor barbed wire tape companies

razor barbed wire tape company

razor barbed wire tape exporter

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

razor barbed wire tape exporters

Installation of this fence 

  1. U samee godka tiirarka iyo tiirarka.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

  1. Boostada iyo dhejiska dhejiska.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

  1. Rakibaadda muraayadda siliga ee alxanka

Markaa waa in aad sugto ilaa shubka uu ka engegan yahay. Kadibna waxaad ku rakibi kartaa xayndaabka mesh-ka ee siliga welded oo ay la socdaan boostada. Sababtoo ah boostada, waxaanu samaynay qabsatooyinkooda, marka la rakibo guddiga mesh silig, alignment gelin silig on jillaab, si ay guddiga mesh silig waa mid aad u deggan, halkan u baahan tahay in aan ku dhufan qabsatooyinkooda siman dubbaha.

  1. Rakibaadda siliga kacsan

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

Welcome to contact and send inquiries  

La wadaag

Haddii aad xiisaynayso alaabtayada, waxaad dooran kartaa inaad macluumaadkaaga kaga tagto halkan, wax yarna waanu kula soo xidhiidhi doonaa.


soSomali