欢迎访问我们的网站!

7 月 . 06, 2023 11:18 返回目录

Loading of welded wire mesh highway fence



loading of welded wire mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

Installation of this fence 

  1. 为柱子和支架打孔。

 

每隔2m或2.5m或3m或5m在地面上为立柱挖孔,常见的孔尺寸为300mm-500mm。深度为500mm-1000mm。对齐使它们保持一致。每隔5-20m,在立柱左右各挖两个孔,放两个支架。孔尺寸与柱孔尺寸相同。   

  1. 柱子和支架安装。

所有的洞打完之后,把柱子放进洞里。施工中柱子接近深度时要注意控制锤击力。然后像这样浇筑混凝土,同样安装支架,支架用螺栓连接:

  1. 电焊网面板安装

然后你必须等到混凝土足够干燥。然后您可以将电焊网围栏面板与立柱一起安装。因为在立柱上,我们做了挂钩,安装丝网面板的时候,对齐把线放在挂钩上,为了让丝网面板更稳固,这里需要我们用锤子把挂钩敲平。

  1. 张力线安装

首先,用紧线器将张力线的一端固定在第一根立柱上。其次,间隔15米,将拉紧线的另一端固定在立柱上,用收紧器将线拉直。并且丝网面板更稳定。

Welcome to contact and send inquiries  

分享

如果您对我们的产品感兴趣,您可以选择在这里留下您的信息,我们会尽快与您联系。


zh_CNChina