歡迎訪問我們的網站!

7 月 . 06, 2023 11:18 返回目錄

Loading of welded wire mesh highway fence



loading of welded wire mesh highway fence

We loaded the welded wire mesh fence for highway yesterday. It has better prices comparing with other fence, and it install easily,so it is very popular for highway protecting

This kind of fence includes: 

  • Welded wire mesh

      Mesh : 100x150mm, 100x200mm, 150mmx200mm, 150mmx100mm

      Wire diameter: 1.8mm-3.5mm

      Width: 1.5m-2.2m 

      Length: 20m-50m each roll 

  • post 30x40x30mm , 40x50x40mm  thickness: 1.4mm-3mm 

 

  • post brace, 30x40x30mm , 40x50x40mm , thickness: 1.4mm-3mm, it connected   with post with screws and nuts 

 

  •  Galvanized tension wire: 2.0mm- 2.5mm 

 

  •  Wire tighterners 

 

Installation of this fence 

  1. 為柱子和支架打孔。

 

每隔2m或2.5m或3m或5m在地面上為立柱挖孔,常見的孔尺寸為300mm-500mm。深度為500mm-1000mm。對齊使它們保持一致。每隔5-20m,在立柱左右各挖兩個孔,放兩個支架。孔尺寸與柱孔尺寸相同。   

  1. 柱子和支架安裝。

所有的洞打完之後,把柱子放進洞裡。施工中柱子接近深度時要注意控制錘擊力。然後像這樣澆築混凝土,同樣安裝支架,支架用螺栓連接:

  1. 電焊網面板安裝

然後你必須等到混凝土足夠乾燥。然後您可以將電焊網圍欄面板與立柱一起安裝。因為在立柱上,我們做了掛鉤,安裝絲網面板的時候,對齊把線放在掛鉤上,為了讓絲網面板更穩固,這裡需要我們用錘子把掛鉤敲平。

  1. 張力線安裝

首先,用緊線器將張力線的一端固定在第一根立柱上。其次,間隔15米,將拉緊線的另一端固定在立柱上,用收緊器將線拉直。並且絲網面板更穩定。

Welcome to contact and send inquiries  

分享

如果您對我們的產品感興趣,您可以選擇在這裡留下您的信息,我們會盡快與您聯繫。


zh_TWChina (Taiwan)