Kafin Farawa 
Nemo ko ana buƙatar ku sami izinin gini da yanki.
Shin shingen ku zai hadu da hani na aikin unguwa.
Kafa layukan dukiya.
Sanya abubuwan amfaninku na karkashin kasa su kasance. (Blue staked)
If you are having your fence installed by someone, are they covered by Workman’s Compensations Insurance?

Kayan aiki masu amfani don shigar da shingen shingen sarkar 
Tef Auna
Mataki
Pliers
Yankan Waya
Guma mai linzami
Post Hole Digger
Wheelbarrow, Shebur da Hoe don Haɗawa da jigilar Kankara
Hacksaw ko Pipe Cutter
Layin String / Mason da Matsaloli
Crescent Wrench
Za a iya amfani da shinge Stretcher (nau'in ratchet na jan wuta, toshewa da tuntuɓar, ko makamancin na'ura. Yawancin kayan aikin shimfiɗa waya ana iya aro ko hayar gida.)

Kayayyakin da ake buƙata don Ƙarƙashin Ƙarƙashin Ƙarƙashin Gida
Bayani	Hoto	Yawan Amfani	Yawan da za a saya
Fence Fabric		Yawancin lokaci ana sayar da su a cikin nadi na ƙafa 50
Babban Rail		Jimlar faifan shinge na ƙarancin buɗewar kofa
Rubutun layi (matsakaici)		Raba jimillar fim ɗin da 10 kuma a tattara sama (duba ginshiƙi a ƙasa)
Rubutun Tasha (ƙarshen, kusurwa, da maƙallan ƙofa) (yawanci girma fiye da saƙon layi)		Kamar yadda ake buƙata (2 ga kowane kofa)
Babban Hannun Jirgin Ruwa		1 ga kowane tsayin layin dogo na saman fili. Ba a buƙata don babban dogo mai lanƙwasa
Madauki Caps		Yi amfani da 1 kowane sakon layi (salo biyu an nuna hagu)
Tashin hankali Bar		Yi amfani da 1 ga kowane ƙarshen kofa, 2 don kowane kusurwar kusurwa
Bandan takalmin gyaran kafa		Yi amfani da 1 kowane mashaya tashin hankali (yana riƙe ƙarshen layin dogo a wurin)
Rail Ƙarshe		Yi amfani da 1 kowane mashaya tashin hankali
Tashin hankali Band		Yi amfani da 4 kowane mashaya tashin hankali ko 1 kowace ƙafa na tsayin shinge
Karusa 5/16" x 1 1/4"		Yi amfani da 1 kowane tashin hankali ko bandejin takalmin gyaran kafa
Post Cap		Yi amfani da 1 don kowane tashar tasha
Katangar shinge / ƙugiya		1 ga kowane 12 "na madogaran layi da 1 don kowane 24" na babban dogo
Ƙofar Tafiya
Ƙofar Direba Biyu
Hinge Na Namiji / Buga Hinge		2 kofofin tafiya ɗaya da 4 kowace ƙofar tuƙi biyu
Karusa 3/8" x 3"		1 ga kowane hinge na namiji
Hinge na Mata / Ƙofar Hinge		2 kofofin tafiya ɗaya da 4 kowace ƙofar tuƙi biyu
Karusa Bolt 3/8" x 1 3/4"		1 a kowace hinge na mace
Fork Latch		1 kowace ƙofar tafiya

Mataki 1 - Binciken Layukan Dukiya
Tabbatar cewa shingen bai wuce layin dukiya ba. Yawancin masu saka shinge suna ba da shawarar cewa a saita duk posts kamar 4" a cikin layin kadarorin. Wannan zai taimaka wajen guje wa shiga cikin kadarorin da ke kusa tare da sawun kankare. Ana yin wannan cikin sauƙi ta hanyar shimfiɗa kirtani tare da layin kadarorin da saita saƙon 4" a ciki. 

Step 2 - Locate and set Terminal Posts (corner, end, and gate posts are called terminal posts)
Ana ƙididdige nisa tsakanin ginshiƙan ƙofar ta ƙara ainihin faɗin ƙofar tare da izinin hinges da latches. Yawancin ƙofofin tafiya suna buƙatar 3 3/4" don hinges da latches kuma kofofin tuƙi biyu suna buƙatar 5 1/2". Na gaba, tono ramukan.

Ya kamata a saita tasha posts 2" mafi girma daga tsawo na shinge masana'anta da kuma layin layi 2" ƙasa da tsayin masana'anta na shinge (matsakanin tashar ya kamata su zama 4" mafi girma fiye da saƙon layi). kankare mix Za a iya amfani da siminti kashi 1, yashi kashi 2, da tsakuwa sassa 4. Haka nan akwai siminti kafin a hada su, a yi amfani da matakin da za a tabbatar da madaidaitan sakonnin su kasance a tsakiya a cikin rami, Crown posts footings don haka. ruwan zai zube daga ginshiƙan. 

Mataki na 3 - Gano wuri kuma saita Saƙonnin Layi
After the concrete around the terminal posts have hardened, stretch a string tight between the terminal posts. The string should be 4" below the top of the terminal posts. Line posts should not be spaced more than 10 feet apart. For example, if the length between two terminal posts is 30 feet, then line posts would be spaced 10 feet apart (see chart below). ig the post holes and set the line posts. Before concrete begins to set, adjust post height by moving post up or down. Top of the line posts should be even with the string. Check with level to make sure posts are straight.

Mataki na 4 - Aiwatar da Kayan aiki zuwa Rubutun Tasha
Duba lissafin kayan aiki da jadawalin kayan aiki a sama. Bayan an shigar da duk saƙon kuma ƙwanƙwaran ƙafa sun taurare, zame daɗaɗɗa da maɗaurin takalmin gyaran kafa zuwa maƙallan tasha. Dogon lebur mai tsayi na band ɗin tashin hankali yakamata ya fuskanci waje na shingen. A kula kar a yada ko karkatar da kayan aikin. Yanzu yi amfani da tashoshi na post.

Mataki na 5 - Aiwatar da Babban Rail
Haɗa madaukin madauki zuwa ginshiƙan layi. Saka tsayin bututun dogo guda ɗaya ta saman-ido mafi kusa da ɗayan tashar tashar. Zamar da ƙarshen layin dogo zuwa ƙarshen saman dogo kuma haɗa shi zuwa madaidaicin madaidaicin ta amfani da bandejin takalmin gyaran kafa (Idan ana amfani da babban dogo na swedge, kar a saka ƙarshen maɗaɗɗen cikin ƙarshen layin dogo). Tsare ƙarshen layin dogo zuwa band ɗin takalmin gyaran kafa tare da kullin abin hawa. Ci gaba ta hanyar haɗa manyan tituna tare. Idan ba a yi amfani da babban titin dogo mai lanƙwasa ba, zaku haɗa ƙarshen layin dogo tare ta amfani da hannun rigar dogo. Bayan isa ga sauran tashar tashar, auna a hankali kuma yanke saman dogo don dacewa da ƙarshen layin dogo. Amintaccen ƙarshen layin dogo zuwa tashar tasha tare da bandejin takalmin gyaran kafa da kullin karusa.

Mataki 6 - Hang Chain Link Fabric
Cire masana'anta na sarkar a ƙasa tare da layin shinge. Matsa sandar tashin hankali ta hanyar mahaɗin ƙarshe akan masana'anta na haɗin sarkar. Tsaya masana'anta sama da shimfiɗa shi a kan ginshiƙan. Ɗaure sandar tashin hankali (wanda kawai kuka saka) zuwa madaidaicin madaidaicin tare da maƙallan tashin hankali (riga akan post ɗin). Yi amfani da kusoshi tare da kai zuwa wajen shingen. Yi tafiya tare da shinge kuma fitar da slack. Saka masana'anta a hankali zuwa saman dogo tare da ƴan igiyoyin waya.

To connect two sections or rolls of fence fabric together - take a single strand of wire from one of the sections of fence (Sometimes it is necessary to remove a second wire on the one end in order for the two sections to mesh properly.). Place the two section of fence next to each other (end on end). Join the two sections by winding (corkscrew fashion) the loose strand down through the fence. Join and tighten the knuckles at bottom and top. Now you shouldn't even be able to see where the two sections were connection together.

To remove excess chain link fence fabric - untie both top and bottom ends of fence (knuckles - pliers shown below). Twist the wire in a corkscrew fashion until the fence comes apart. One picket shown in red is turned until the fence is separated.

Mataki na 7 - Fabric mai shimfiɗa sarkar
Ya kamata a riga an ɗaure masana'anta zuwa ƙarshen shingen. Saka sandar tashin hankali (na iya buƙatar ƙarin ɗaya) kusan ƙafa 3 a cikin ƙarshen masana'anta da ba a haɗa su ba. Aminta da ɗaure ƙarshen shingen shingen zuwa sandar tashin hankali da ɗayan ƙarshen zuwa madaidaicin tasha. Miƙe masana'anta - madaidaicin tashin hankali ya kamata ya ba da damar ɗan adadin bayarwa lokacin matsi da hannu. Ya kamata saman masana'anta ya kasance kusan 1/2" sama da babban dogo. Daidaita masana'anta zuwa daidai tsayi ta ƙara ko cire waya kamar yadda aka ambata a mataki na 6. Saka sandar tashin hankali a ƙarshen masana'anta kuma haɗa igiyoyin tashin hankali a kan tashar tashar. . Cire shimfiɗar shinge. Haɗa haɗin waya zuwa saman dogo 24 inci dabam. Haɗa igiyoyin waya zuwa ginshiƙai na 12 inci dabam. Ƙarfafa goro a kan duk igiyoyin takalmin gyaran kafa da tashin hankali.

Mataki na 8 - Rataye Ƙofar
Bayan an gama shingen, shigar da ƙugiya na maza zuwa ɗaya daga cikin ginshiƙan ƙofa, rataye saman saman tare da fil yana nuna ƙasa da ƙasan ƙasa tare da fil ɗin sama. Hakan zai hana a daga kofar. Saita ƙofa a wuri, daidaita saman ƙofar tare da saman shinge. Daidaita ku matsa hinges don ba da damar yin murɗawa sosai. Sanya latch ɗin ƙofa don ƙofofi guda ɗaya. Ƙofofi biyu suna amfani da hanya iri ɗaya amma shigar da na'urar latch na tsakiya (latch cokali mai yatsa).

Notes: Post depth can be determined by local weather and soil conditions, terminal posts are normally dug 10" wide and 18" to 30" deep. Depending on the wind and soil conditions you may want to use 8' centers or even a more narrow spacing for line posts. You may want to use longer line or terminal posts depending on the wind and soil conditions in your area. If you want to add privacy slats in the future, make sure the frame work will be strong enough for additional wind load.

Orange barrier fencing mesh is an extruded polypropylene plastic mesh fencing for cordoning off building sites, construction sites, sporting event areas and for general crowd and pedestrian control. Orange barrier fencing mesh is UV stabilised and a bright high visablity orange colour for maximum warning.
We offer various grades/weights of  orange safty mesh fence. 

Our light grade (110g/m²) and Medium grade (140g/m²) are stretched during the extrusion process to give them a very high tensile strength making them very robust for harsh building sites. Our heavy grade barrier mesh fencing (200g/m²) is unstretched and provides a far more visual orange fence.

 

Aikace-aikace
§ Temporary fencing where an area needs to be cordonned off
§ Cordoning off construction sites / building sites
§ Temporary plastic fence for crowd control

Siffofin
§ Lightweight and fast to install
§ UV Stabilised plastic mesh
§ High visibility orange mesh colour
§ Reusable - easily installed, easy to roll up and use again