Sadurunge Miwiti 
Temokake yen sampeyan kudu entuk ijin bangunan lan zoning.
Apa pager sampeyan bakal ketemu watesan akta lingkungan.
Nggawe garis properti.
Duwe utilitas lemah sampeyan dumunung. (Toko biru)
If you are having your fence installed by someone, are they covered by Workman’s Compensations Insurance?

Alat sing migunani kanggo nginstal pager chain link 
Meteran
tingkat
tang
Pemotong Kawat
Sledge Hammer
Post Hole Digger
Gerobak, Sekop lan Pacul kanggo Nyampur lan Ngangkut Beton
Hacksaw utawa Pipe Cutter
String / Mason Line lan totoan
Kunci Sabit
Tandu Pagar (tarik daya jinis ratchet, pamblokiran lan tackle, utawa piranti sing padha bisa digunakake. Umume alat peregangan kawat bisa dipinjam utawa disewa sacara lokal.)

Bahan sing Dibutuhake kanggo Pagar Link Chain Residential
Katrangan	Gambar	Jumlah kanggo Gunakake	Jumlah kanggo Tuku
Kain Pagar		Biasane didol ing gulungan 50 kaki
Top Rail		Total rekaman pager kurang bukaan gerbang
Kiriman Line (tulisan penengah)		Bagekake cuplikan total kanthi 10 lan bunder (deleng grafik ing ngisor iki)
Pos Terminal (pos mburi, pojok, lan gerbang) (biasane luwih gedhe tinimbang kiriman baris)		Yen dibutuhake (2 kanggo saben gerbang)
Lengan Rail Top		1 kanggo saben dawa ril ndhuwur kosong. Ora dibutuhake kanggo rel ndhuwur swedged
Loop Caps		Gunakake 1 saben kiriman baris (loro gaya ditampilake ing sisih kiwa)
Tension Bar		Gunakake 1 kanggo saben pos pungkasan utawa gerbang, 2 kanggo saben pos pojok
Brace Band		Gunakake 1 saben bar tension (nyekel mburi rel ing panggonan)
Rail Ends		Gunakake 1 saben bar tension
Tension Band		Gunakake 4 saben bar tension utawa 1 saben sikil dhuwur pager
Baut gerbong 5/16" x 1 1/4"		Gunakake 1 saben tension utawa brace band
Posting Kab		Gunakake 1 kanggo saben pos terminal
Pengikat Pagar / Pengikat Pancing		1 kanggo saben 12" kiriman baris lan 1 kanggo saben 24" ril ndhuwur
Lawang Lawang
Dobel Drive Gate
Engsel lanang / Engsel Pos		2 saben gerbang mlaku siji lan 4 saben gerbang drive dobel
Baut gerbong 3/8" x 3"		1 saben engsel lanang
Engsel Wanita / Engsel Gerbang		2 saben gerbang mlaku siji lan 4 saben gerbang drive dobel
Bolt gerbong 3/8" x 1 3/4"		1 saben engsel wadon
Kancing Garpu		1 saben gerbang mlaku

Langkah 1 - Survey Property Lines
Priksa manawa pager ora ngluwihi garis properti. Paling installers pager nyaranake supaya kabeh kiriman disetel kira-kira 4 "nang baris property. Iki bakal bantuan supaya encroaching ing property jejer karo footings beton. Iki gampang rampung dening mulet senar ing sadawane baris property lan nyetel kiriman 4" nang. 

Step 2 - Locate and set Terminal Posts (corner, end, and gate posts are called terminal posts)
Jarak antarane kiriman gerbang ditemtokake kanthi nambahake jembar gapura sing nyata plus tunjangan kanggo engsel lan latches. Biasane lumaku gerbang mbutuhake 3 3/4 "kanggo hinges lan latches lan pindho drive gates mbutuhake 5 1/2". Sabanjure, ndhudhuk bolongan.

Pos terminal kudu disetel 2" luwih dhuwur tinimbang dhuwur kain pager lan kiriman baris 2" luwih murah tinimbang dhuwur kain pager (posting terminal kudu 4" luwih dhuwur tinimbang kiriman baris). Setel kiriman terminal ing beton nggunakake a campuran beton Sampeyan bisa nggunakake 1 bagean semen, 2 bagean wedhi, lan 4 bagean kerikil. Ana uga pre-mix semen. Gunakake level kanggo mesthekake yen kiriman lurus. Posting kudu dipusatake ing bolongan. Crown posting footings supaya banyu bakal saluran adoh saka kiriman. 

Langkah 3 - Goleki lan atur Kiriman Line
After the concrete around the terminal posts have hardened, stretch a string tight between the terminal posts. The string should be 4" below the top of the terminal posts. Line posts should not be spaced more than 10 feet apart. For example, if the length between two terminal posts is 30 feet, then line posts would be spaced 10 feet apart (see chart below). ig the post holes and set the line posts. Before concrete begins to set, adjust post height by moving post up or down. Top of the line posts should be even with the string. Check with level to make sure posts are straight.

Langkah 4 - Aplikasi Fittings kanggo Kiriman Terminal
Priksa dhaptar materi lan bagan fitting ing ndhuwur. Sawise kabeh postingan wis dipasang lan pondasi beton wis atos, selehake tension lan brace bands menyang kiriman terminal. Lumahing warata dawa saka pita tension kudu ngadhepi njaba pager. Ati-ati supaya ora nyebar utawa ngrusak fitting. Saiki aplikasi tutup pos terminal.

Langkah 5 - Aplikasi Top Rail
Pasang tutup loop menyang kiriman baris. Lebokake siji dawa saka pipa rel ndhuwur liwat mripat-top paling cedhak siji saka pos terminal. Geser ujung rel menyang mburi rel ndhuwur lan pasang menyang pos termianl kanthi nggunakake pita penyangga (Yen nggunakake rel ndhuwur swedge, aja lebokake ujung swedged menyang mburi rel). Amanake ujung rel menyang pita penyangga kanthi bolt kreta. Terusake kanthi masang ril ndhuwur bebarengan. Yen rel ndhuwur swedged ora digunakake, sampeyan bakal nyambungake ril ends bebarengan kanthi nggunakake rel rel ndhuwur. Sawise tekan pos terminal liyane, ukur kanthi ati-ati lan potong rel ndhuwur supaya pas karo ujung rel. Ujung rel sing aman menyang pos terminal kanthi band brace lan bolt gerbong.

Langkah 6 - Gantung Chain Link Fabric
Unroll kain link chain ing lemah ing sadawane garis pager. Geser garis tension liwat link pungkasan ing kain link chain. Ngadegake kain lan nyelehake ing postingan. Kencangake garis tension (sing sampeyan mung lebokake) menyang pos terminal kanthi pita tension (wis ing postingan). Gunakake bolt kreta kanthi sirah menyang njaba pager. Mlaku ing sadawane pager lan njupuk slack metu. Tempelake kain menyang ril ndhuwur kanthi sawetara ikatan kawat.

To connect two sections or rolls of fence fabric together - take a single strand of wire from one of the sections of fence (Sometimes it is necessary to remove a second wire on the one end in order for the two sections to mesh properly.). Place the two section of fence next to each other (end on end). Join the two sections by winding (corkscrew fashion) the loose strand down through the fence. Join and tighten the knuckles at bottom and top. Now you shouldn't even be able to see where the two sections were connection together.

To remove excess chain link fence fabric - untie both top and bottom ends of fence (knuckles - pliers shown below). Twist the wire in a corkscrew fashion until the fence comes apart. One picket shown in red is turned until the fence is separated.

Langkah 7 - Stretch Chain Link Fabric
Kain kudu wis diikat menyang mburi pager. Lebokake garis tension (bisa uga mbutuhake tambahan) kira-kira 3 kaki ing mburi kain sing ora dipasang. Cepet kanthi aman siji ujung tandu pager menyang garis tension lan ujung liyane menyang pos terminal. Stretch kain - tension bener ngirim ngidini jumlah tipis menehi nalika squeezed dening tangan. Ndhuwur kain kudu dumunung kira-kira 1/2 "ing ndhuwur ril ndhuwur. Nyetel kain kanggo dawa pas kanthi nambah utawa njabut kabel minangka kasebut ing langkah 6. Pasang garis tension ing mburi kain lan sambungake pita tension ing post terminal . Copot tandu pager. Pasang ikatan kabel menyang rel ndhuwur 24" loro. Pasang ikatan kabel menyang kiriman 12" loro. Kencengake kacang ing kabeh brace lan pita tension.

Langkah 8 - Gantung Gates
Sawise pager wis rampung, masang hinges lanang kanggo salah siji saka kiriman gapura, hanging engsel ndhuwur karo pin pointing mudhun lan engsel ngisor karo pin pointing munggah. Iki bakal nyegah gapura supaya ora diangkat. Setel gapura ing panggonan, aligning ndhuwur gapura karo ndhuwur pager. Nyetel lan kenceng engsel kanggo ngidini ayunan lengkap. Pasang kait gerbang kanggo gerbang tunggal. Gapura kaping pindho nggunakake prosedur sing padha nanging nginstal piranti latching tengah (kait garpu).

Notes: Post depth can be determined by local weather and soil conditions, terminal posts are normally dug 10" wide and 18" to 30" deep. Depending on the wind and soil conditions you may want to use 8' centers or even a more narrow spacing for line posts. You may want to use longer line or terminal posts depending on the wind and soil conditions in your area. If you want to add privacy slats in the future, make sure the frame work will be strong enough for additional wind load.

Orange barrier fencing mesh is an extruded polypropylene plastic mesh fencing for cordoning off building sites, construction sites, sporting event areas and for general crowd and pedestrian control. Orange barrier fencing mesh is UV stabilised and a bright high visablity orange colour for maximum warning.
We offer various grades/weights of  orange safty mesh fence. 

Our light grade (110g/m²) and Medium grade (140g/m²) are stretched during the extrusion process to give them a very high tensile strength making them very robust for harsh building sites. Our heavy grade barrier mesh fencing (200g/m²) is unstretched and provides a far more visual orange fence.

 

Aplikasi
§ Temporary fencing where an area needs to be cordonned off
§ Cordoning off construction sites / building sites
§ Temporary plastic fence for crowd control

Fitur
§ Lightweight and fast to install
§ UV Stabilised plastic mesh
§ High visibility orange mesh colour
§ Reusable - easily installed, easy to roll up and use again