Καλώς ήρθατε στις ιστοσελίδες μας!

Απρ . 23, 2023 18:42 Πίσω στη λίστα

Εγκατάσταση φράχτη αυτοκινητόδρομου



  1. Κάντε την τρύπα για στύλους και τιράντες.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Τοποθέτηση στύλων και τιράντες.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Τοποθέτηση πάνελ με συγκολλημένο συρμάτινο πλέγμα

Στη συνέχεια, πρέπει να περιμένετε μέχρι το σκυρόδεμα να στεγνώσει αρκετά. Στη συνέχεια, μπορείτε να εγκαταστήσετε το συγκολλημένο συρμάτινο πλέγμα φράχτη μαζί με τον στύλο. Επειδή στον στύλο, έχουμε φτιάξει τα άγκιστρα, όταν τοποθετούμε το συρμάτινο πάνελ, ευθυγραμμίζουμε το σύρμα στο άγκιστρο, για να είναι πιο σταθερό το συρμάτινο πάνελ, εδώ χρειάζεται να χτυπήσουμε τα άγκιστρα επίπεδα με το σφυρί.

 

security concertina razor wire fence exporter

 

  1. Εγκατάσταση σύρματος τάνυσης

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Μερίδιο

Εάν ενδιαφέρεστε για τα προϊόντα μας, μπορείτε να επιλέξετε να αφήσετε τα στοιχεία σας εδώ και θα επικοινωνήσουμε μαζί σας σύντομα.


elGreek