ברוכים הבאים צו אונדזער וועבסיטעס!

אפר . 23, 2023 18:42 צוריק צו רשימה

שאָסיי פּלויט ינסטאַלירונג



  1. מאַכן די לאָך פֿאַר הודעות און ברייסאַז.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. ייַנמאָנטירונג פון אַרטיקלען און ברייסאַז.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. וועלדעד דראָט ייגל טאַפליע ינסטאַלירונג

דעמאָלט איר מוזן וואַרטן ביז די באַטאָנען טרוקן גענוג. דעמאָלט איר קענען ינסטאַלירן די וועלדעד דראָט ייגל פּלויט טאַפליע צוזאַמען מיט די פּאָסטן. ווייַל אויף די פּאָסטן, מיר האָבן געמאכט די כוקס, ווען ינסטאַלירן די דראָט ייגל טאַפליע, אַליינמאַנט שטעלן די דראָט אויף די קרוק, אין סדר אַז די דראָט ייגל טאַפליע איז מער סטאַביל, דאָ מיר דאַרפֿן צו שלאָגן די כוקס פלאַך מיט די האַמער.

 

security concertina razor wire fence exporter

 

  1. שפּאַנונג דראָט ינסטאַלירונג

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

ייַנטיילן

אויב איר זענט אינטערעסירט אין אונדזער פּראָדוקטן, איר קענען קלייַבן צו לאָזן דיין אינפֿאָרמאַציע דאָ, און מיר וועלן זיין אין קאָנטאַקט מיט איר באַלד.


yiYiddish