Біздің веб-сайттарымызға қош келдіңіз!

Сәу . 23, 2023 18:42 Тізімге оралу

Жол қоршауын орнату



  1. Бағаналар мен жақшалар үшін тесік жасаңыз.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Бағаналар мен жақшаларды орнату.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Дәнекерленген сым торлы панельді орнату

Содан кейін бетон жеткілікті құрғақ болғанша күту керек. Содан кейін бағанамен бірге дәнекерленген торлы қоршау панелін орнатуға болады. Бағанада біз ілмектерді жасадық, сым торлы панельді орнатқанда, сымды ілгекке салыңыз, сым торлы панель неғұрлым тұрақты болуы үшін, мұнда балғамен ілмектерді тегіс соғу керек.

 

security concertina razor wire fence exporter

 

  1. Кернеу сымын орнату

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Бөлісу

Егер сіз біздің өнімдерге қызығушылық танытсаңыз, ақпаратыңызды осында қалдыра аласыз, біз сізбен жақын арада байланысамыз.


kkKazakh