Tongasoa eto amin'ny tranokalanay!

Apr. 23, 2023 18:42 Hiverina any amin'ny lisitra

Fametrahana fefy lalambe



  1. Ataovy ny lavaka ho an'ny poste sy braces.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Fametrahana poste sy braces.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Fametrahana tontonana tariby welded

Avy eo dia tsy maintsy miandry mandra-maina ampy ny beton. Avy eo ianao dia afaka mametraka ny welded welded mesh fefy tontonana miaraka amin'ny lahatsoratra. Satria eo amin'ny lahatsoratra, dia nanao ny farango, rehefa mametraka ny tariby harato tontonana, alignment mametraka ny tariby eo amin'ny farango, mba ho mafy orina kokoa ny tariby harato tontonana, eto dia mila isika namely ny farango fisaka amin'ny tantanana.

 

security concertina razor wire fence exporter

 

  1. Fametrahana tariby fihenjanana

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

anjara

Raha liana amin'ny vokatray ianao dia afaka misafidy ny hamela ny mombamomba anao eto, ary hifandray aminao izahay ato ho ato.


mgMalgashi