Vitajte na našich stránkach!

apr . 23, 2023 18:42 Späť na zoznam

Inštalácia diaľničného plotu



  1. Vytvorte otvor pre stĺpiky a výstuhy.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Inštalácia stĺpikov a výstuh.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Inštalácia panelov zo zváraného drôteného pletiva

Potom musíte počkať, kým betón dostatočne nevyschne. Potom môžete nainštalovať plotový panel zo zváraného drôteného pletiva spolu so stĺpikom. Pretože na stĺpiku sme vyrobili háky, pri inštalácii drôteného pletiva zarovnajte drôt na hák, aby bol drôtený pletivový panel stabilnejší, tu je potrebné, aby sme háky udreli kladivom naplocho.

 

security concertina razor wire fence exporter

 

  1. Inštalácia napínacieho drôtu

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

zdieľam

Ak máte záujem o naše produkty, môžete tu nechať svoje informácie a my sa vám čoskoro ozveme.


sk_SKSlovak