Безнең сайтларга рәхим итегез!

Апр . 23, 2023 18:42 Исемлеккә кире кайту

Магистраль койма урнаштыру



  1. Постлар һәм кашыклар өчен тишек ясагыз.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Постлар һәм кашыклар урнаштыру.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Эретеп ябыштырылган чыбыктан ясалган панель урнаштыру

Аннары бетон җитәрлек корыганчы көтәргә кирәк. Аннары сез пост белән бергә эретеп ябыштырылган чыбык койма панелен урнаштыра аласыз. Чөнки постта без калькалар ясадык, чыбыктан ясалган панельне урнаштырганда, тигезләү чыбыкны кальянга куя, чыбыктан ясалган панель тотрыклырак булсын өчен, безгә чүкечләр белән тигез итеп сугарга кирәк.

 

security concertina razor wire fence exporter

 

  1. Киеренке чыбык урнаштыру

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Бүлешү

Әгәр дә сез безнең продуктлар белән кызыксынсагыз, сез үз мәгълүматыгызны монда калдыра аласыз, һәм без тиздән сезнең белән элемтәдә торырбыз.


tt_RUTatar