Benvenuto sui nostri siti web!

apr. 23, 2023 18:42 Torna alla lista

Installazione recinzione autostradale



  1. Fai il buco per pali e bretelle.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Installazione pali e controventi.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Installazione di pannelli in rete elettrosaldata

Quindi devi aspettare che il cemento si asciughi abbastanza. Quindi è possibile installare il pannello di recinzione in rete metallica saldata insieme al palo. Poiché sul palo abbiamo realizzato i ganci, quando installiamo il pannello in rete metallica, l'allineamento mette il filo sul gancio, in modo che il pannello in rete metallica sia più stabile, qui abbiamo bisogno di colpire i ganci in piano con il martello.

 

security concertina razor wire fence exporter

 

  1. Installazione del filo di tensione

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Condividere

Se sei interessato ai nostri prodotti, puoi scegliere di lasciare le tue informazioni qui e ti contatteremo a breve.


it_ITItalian