Sugeng rawuh ing situs web kita!

Apr. 23, 2023 18:42 Bali menyang dhaptar

Pemasangan pagar jalan raya



  1. Nggawe bolongan kanggo kiriman lan braces.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Instalasi posts lan braces.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Pemasangan panel wire mesh dilas

Banjur sampeyan kudu ngenteni nganti beton cukup garing. Banjur sampeyan bisa nginstal panel pager kabel bolong gandheng bebarengan karo kirim. Amarga ing kirim, kita wis nggawe pancingan, nalika nginstal panel kabel bolong, alignment sijine kabel ing pancing, supaya panel kabel bolong luwih stabil, kene kudu kita mencet pancingan warata karo Pethel.

 

security concertina razor wire fence exporter

 

  1. Pemasangan kabel tension

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Nuduhake

Yen sampeyan kasengsem ing produk kita, sampeyan bisa milih ninggalake informasi kene, lan kita bakal ing tutul karo sampeyan sakcepete.


jvJavanese