Wamkelekile kwiiwebhusayithi zethu!

Epreli 23, 2023 18:42 Buyela kuluhlu

Ukufakwa kocingo lwendlela ephezulu



  1. Yenza umngxuma kwizithuba kunye ne-braces.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Ukufakwa kwezithuba kunye neebrasi.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Ufakelo lwepaneli yomnatha wocingo oludityanisiweyo

Emva koko kufuneka ulinde de ikhonkrithi yome ngokwaneleyo. Emva koko ungafaka ipaneli yocingo oludityanisiweyo kunye nepali. Ngenxa yokuba kwisithuba, senze iigwegwe, xa ufaka ipaneli ye-wire mesh, ukulungelelaniswa ubeke ucingo kwi-hook, ukwenzela ukuba ipaneli ye-wire mesh izinzile, apha kufuneka sibethe ii-hook flat kunye nehamile.

 

security concertina razor wire fence exporter

 

  1. Ufakelo lwentambo yoxinzelelo

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Yabelana

Ukuba unomdla kwiimveliso zethu, unokukhetha ukushiya ulwazi lwakho apha, kwaye siya kuqhagamshelana nawe kungekudala.


xhBantu