Velkommen til våre nettsider!

apr . 23, 2023 18:42 Tilbake til listen

Montering av motorveigjerde



  1. Lag hullet for stolper og seler.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Montering av stolper og avstivere.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Installasjon av sveiset trådnettpanel

Da må du vente til betongen er tørr nok. Deretter kan du installere det sveisede nettinggjerdepanelet sammen med stolpen. Fordi på stolpen, har vi laget krokene, når du installerer nettingpanelet, justering setter du tråden på kroken, for at trådnettet panelet er mer stabilt, her trenger vi å slå krokene flatt med hammeren.

 

security concertina razor wire fence exporter

 

  1. Montering av strekktråd

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Dele

Hvis du er interessert i våre produkter, kan du velge å legge igjen informasjonen din her, så tar vi kontakt med deg innen kort tid.


nb_NONorwegian