Laipni lūdzam mūsu tīmekļa vietnēs!

apr. 23, 2023 18:42 Atpakaļ uz sarakstu

Šosejas žoga uzstādīšana



  1. Izveidojiet caurumu stabiem un lencēm.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Stabu un breketu uzstādīšana.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Metināto stiepļu sieta paneļu uzstādīšana

Tad jums jāgaida, līdz betons pietiekami izžūst. Pēc tam kopā ar stabu var uzstādīt metināto stiepļu sieta žoga paneli. Tā kā uz staba esam izgatavojuši āķus, uzstādot stiepļu sieta paneli, izlīdzināšanu uzlieciet stiepli uz āķa, lai stiepļu sieta panelis būtu stabilāks, šeit vajag ar āmuru sasist āķus plakaniski.

 

security concertina razor wire fence exporter

 

  1. Spriegošanas stieples uzstādīšana

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Dalīties

Ja jūs interesē mūsu produkti, varat izvēlēties atstāt savu informāciju šeit, un mēs ar jums sazināsimies tuvākajā laikā.


lvLatvian