Dobrodošli na naše web stranice!

tra . 23, 2023 18:42 Povratak na popis

Montaža ograde na autoputu



  1. Napravite rupu za stupove i spone.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Montaža stupova i spona.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Montaža ploča od zavarene mreže

Zatim morate pričekati da se beton dovoljno osuši. Zatim možete montirati zavarenu ploču za ogradu zajedno sa stupom. Budući da smo na stupu napravili kuke, kada postavljamo ploču od žičane mreže, poravnajte žicu na kuku, kako bi ploča od žičane mreže bila stabilnija, ovdje trebamo udariti čekićem po kukama.

 

security concertina razor wire fence exporter

 

  1. Montaža zatezne žice

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Udio

Ako ste zainteresirani za naše proizvode, svoje podatke možete ostaviti ovdje, a mi ćemo vas uskoro kontaktirati.


hrCroatian