Wëllkomm op eise Websäiten!

Apr. 23, 2023 18:42 Zréck op d'Lëscht

Installatioun vun Autobunne



  1. Maacht d'Lach fir Posts a Klameren.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Posts an Klameren Installatioun.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Beweegt Drot Mesh gemaach Panel Installatioun

Da musst Dir waarden bis de Beton genuch trocken ass. Da kënnt Dir de geschweißten Drotmesh Zaitpanel zesumme mat der Post installéieren. Well op der Post hu mir d'Haken gemaach, wann Dir d'Draadmesh Panel installéiert, d'Ausrichtung den Drot op den Haken setzen, fir datt d'Draadmesh Panel méi stabil ass, hei brauche mir d'Haken flaach mam Hammer ze schloen.

 

security concertina razor wire fence exporter

 

  1. Spannung Drot Installatioun

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Deelen

Wann Dir un eise Produkter interesséiert sidd, kënnt Dir wielen Är Informatioun hei ze verloossen, a mir wäerte kuerz mat Iech a Kontakt sinn.


lbLuxembourgish