Welkom op onze websites!

apr . 23, 2023 18:42 Terug naar lijst

Snelweghek plaatsen



  1. Maak het gat voor palen en beugels.

 

Dig the holes on the ground for the post at every 2m, or 2.5m, or 3m, or 5m , the common hole size is 300mm-500mm . depth is 500mm-1000mm. alignment keep them in the line. Every 5-20m , on the left and right of the post,  dig two holes for two braces. the hole size same as the post hole size.   

 

security concertina razor wire fence companies

 

  1. Installatie van palen en beugels.

After all the holes finished , Put the posts into the hole. Pay attention to controlling hammer force when the post approaching the depth in construction. Then pouring of concrete like this, the brace install in the same way, and the brace connect with bolts:

 

security concertina razor wire fence company

 

  1. Installatie van gelast gaaspanelen

Dan moet je wachten tot het beton voldoende droog is. Dan kunt u het gelaste gaasscherm samen met de paal plaatsen. Omdat we op de paal de haken hebben gemaakt, moeten we bij het installeren van het draadgaaspaneel de draad op de haak uitlijnen, zodat het draadgaaspaneel stabieler is, hier moeten we de haken plat slaan met de hamer.

 

security concertina razor wire fence exporter

 

  1. Spandraad installatie

Firstly, make one end of the tension wire fixed on the first post with the wire tighterner  . Secondly, interval of 15meters, the other end of the tension wire fixed on the post , with the wire tighterner, the wire was straightened. and the wire mesh panel was more stable.

 

security concertina razor wire fence exporters

security concertina razor wire fence factories

Deel

Als u geïnteresseerd bent in onze producten, kunt u ervoor kiezen om hier uw gegevens achter te laten, dan nemen wij spoedig contact met u op.


nl_NLDutch